Top Tips for Building Your Own Gaming PC


20 Feb

Building your own gaming PC might seem daunting, but as a gamer, you know that idea has entered your mind at least once, if not one too many times. Besides, a customized rig is your only way of getting just what you want, just how you want it.


While this is not a step-by-step guide to building a gaming PC, it offers the following basic tips to help you through the process:


Make sure you have all the right tools.


To make sure you don’t have to run to the local hardware store every time you remember you need something, remove every single component out of the package and read the installation guides. Know if you have each tool and part important in constructing the PC before you start. You won’t like going back to a PC half built. 


Don’t forget the drivers for your your graphics card.

 

Drivers work by hooking up your motherboard and CPU with your graphics card. Such parts will not naturally process the PCI-E connection, so you need a VGA cable until you the GPU drivers can be installed. After installing every drive, switch the system off as usual and move to HDMI or another connection. Look for one in the box your monitor came in, but if you're connecting this PD to an HDTV, the same thing must be done.  Learn how to build your own gaming pc here!


Power up your drives.


It's a common newbie error, but yes, disk and optical drives also rely on electricity to work, and SATA connections are only good for data, not power. If you don’t connect them to the power supply, they’re not going to explore, but they won’t turn on. You can also learn more tips on where to find the best online gaming, visit https://www.youtube.com/watch?v=buyUoGJVZFM.


Avoid mini ITX if you can.


Mini ITX is the tiniest form factor motherboard and case that takes a discrete graphics card, you’ll want to leave this stuff the pros. With such a small chassis, you can easily get tight as you continue building. Once you get your power supply inside, there will be very little space even for your fingers to work around. This just makes you appreciate the newest consoles and their computing prowess.


Put those cable ties to work.


Finally, before you even begin to slip in silicon, create a plan with the cables. Most probably, you got your case or power supply with a bunch of cables ties. Those can come in handy for looping through the metal hooks found on the case and around each wire in your PC. Know how to build gaming pc here!

Comments
* The email will not be published on the website.
I BUILT MY SITE FOR FREE USING